6m - MB15 Binzel Spool Gun Torch to suit Unimig - Euro Fitting - 24V - 9 Pin

To Suit UNIMIG models below with a 9 pin plug. 

• Razor 175
• Viper 182 Mk 2 ( Not the first generation) 
• Viper 185
• Razor 200
• Razor 205
• Razor 250 
• Razor 200 Compact
• Razor 250 compact. 
• Razor 250 Separate wire feeder
• Razor 350 Compact
• Razor 350 Separate wire feeder
• Razor 500 Separate wire feeder

Features:

• Takes small 1kg steel wire spools or 0.5kg Aluminum
• U Groove roller
• 180 Amp @ 35% duty cycle
• 6 meter cable
• Euro Connection to suit most machines
• 0.8mm and 0.9mm roller part number LWZ20201
• 1.0mm and 1.2mm roller Part number LWZ2020
• No need to change to Knurled or V groove as the distance is short you won’t get the feed issues like do you with a standard 3 meter MIG gun
• 9 pin plug to suit Unimig Razor Mig Welders
• 24 Volt drive motor
• Speed control on hand piece (10 k ohm but not wired)
• Binzel Style MB15 consumables
• Full range of spares available
• Comes standard with 0.8mm roller installed
• You can run a 0.9mm wire through this gun also
• UNIMIG equivalent Part number PLSP150A

Consumable Parts: 

• Binzel Style
• To suit MB15

Contact Tips - 

• CT0866 - 0.8 Steel Wire 
• CT0966 - 0.9 Steel Wire 
• CT0866A - 0.8 Aluminium Wire 
• CT0966A - 0.9 Aluminium Wire 

Nozzles -

• NZCO15
• NZCY15

Tip Adaptors - 

• TA15

Spare Roller -  0.8 and 0.9mm -  LWZ20201

Spare Roller -  1.0mm and 1.2mm - LWZ2020