Strong Hand Fixed 90° Magnet 30° & 60° - 165mm x 110mm x 20mm

Strong Hand Fixed 90° Magnet 30° & 60° - 165mm x 110mm x 20mm

Hold stock from the outside, leaving clearance for inside welds, or hold stock from the inside for outside welds.

Features: 

• The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces
• Use mounting holes to link two magnets together for use as fixturing elements.
• Use hex hole on the magnet for breakaway leverage.
• Hold and position sheet metal, round pipes, square, angled or flat stock.
• Should be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 175ºF / 80ºC and above.
• 165mm x 110mm Long x 20mm Wide