Strong Hand Twin Pack Corner Magnet 60° & 90° - 83 x 95mm x 16mm

Strong Hand Twin Pack Corner Magnet 60° & 90° - 83 x 95mm x 16mm

Hold stock from the outside, leaving clearance for inside welds

Features: 

• Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
• One side corner “relief” provides clearance for tall lips.
• Use the outer edges of the Corner Magnet for setting up materials at 60°.
• 30lbs Magnetic Pull force
• Hold and position sheet metal, round pipes, square, angled or flat stock.
• Should be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 175ºF / 80ºC and above.
• 83mm x 95mm Long x 16mm Wide